little_leigh20
Dice
Inspiration
- Machine
- LP5
- Material
- Wood
- Size
- 100 x 100 mm
- Material Information
- I used 3mm, however i would recommend 4mm Basswood/Plywood
- Software Used
- LaserPecker Design Space Android
- Production Time
- 30 min
- Engraving Difficulty
Design Files
2026/08/18 10:124
Introduction
Wooden dice
Inspiration Tutorial
Settings 1
LineWood
- Engraving Method
- Line
- Material
- Wood
- Power
- 100%
- Depth
- 72%
- Pass
- 20
- Module Type
- 20W 450nm
- Other Parameters
- Plywood. I used 3mm, However 4mm would have worked better, using the same file. I decided to cut the plywood using maximum power, repeatedly, this works for me and removed any burn marks.
My Handmade Daily
DIY Assembly
Cutting
Laser Cutting
Comments