LaserPecker
Easter Decoration Pendant
How-to
- Machine
- LP2
- Material
- Wood
- Size
- 88 x 94 mm
- Material Information
- 1.5mm Wooden Plate Plywood
- Software Used
- LaserPecker Design Space PC
- Production Time
- 30 min
- Engraving Difficulty
Design Files
2025/04/03 11:2616
Introduction
Create fun and creative ornaments to add color to this hopeful Easter!
How-to Tutorial
Step1:
Connect the machine and open the file. Begin by placing 1.5mm plywood on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving and cutting at the same time.
Settings 1
FillWood
- Engraving Method
- Fill
- Material
- Wood
- Resolution
- 2 K
- Power
- 90%
- Depth
- 3%
- Pass
- 1
- Module Type
- 5 W 450 nm
Settings 2
LineWood
- Engraving Method
- Line
- Material
- Wood
- Power
- 100%
- Depth
- 80%
- Pass
- 1
- Module Type
- 5 W 450 nm
Step2:
Color the rabbit's nose and the bowtie, and after they dry, stick them in their respective positions. Finally, use twine to string them together, and the pendant is finished!
Good Life
Easter
Comments