E-Higgs
Introduction
2 Christmas gnomes with standing sign perfect for holiday home decor
How-to Tutorial
Step1: place the wood on the engraving plate and secure it to cut out design shapes. Leave wood in place
Select 3mm thick balsa wood for this project. You will need to use two different settings. The first setting instructions are for cutting the shapes out for this project. Once you are finished cutting leave the wood in place and use the svg file to select only the black circles to engrave next. Follow the settings in step two for proper engraving. Afterwards the pieces will fit together perfectly just use wood glue to secure the pieces in place and acrylic paint to give them their holiday color.
Settings 1
FillWood
- Engraving Method
- Fill
- Material
- Wood
- Resolution
- 2 K
- Power
- 100%
- Depth
- 5%
- Pass
- 3
- Module Type
- 10 W 450 nm
- Other Parameters
- Do not move wood! Leave it in place and follow the settings for the black lines in the file
Settings 2
FillWood
- Engraving Method
- Fill
- Material
- Wood
- Resolution
- 2 K
- Power
- 100%
- Depth
- 5%
- Pass
- 1
- Module Type
- 10 W 450 nm
Christmas
DIY Assembly
Cutting
Knome
holiday
Comments