LaserPecker
Christmas Dog House
How-to
- Machine
- LX1
- Material
- Wood
- Size
- 1634 x 947 mm
- Material Information
- 3mm Basswood Plank
- Software Used
- LaserPecker Design Space PC
- Production Time
- 120 min
- Engraving Difficulty
Design Files
2024/12/07 12:1118
Introduction
Have you picked the perfect gift for your furry friend? With the LaserPecker LX1-Max, you can DIY a cozy little house for them!
How-to Tutorial
Step1:
Connect the machine and open the first file. Begin by placing 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Cut the parts out of the file one by one.
Settings 1
LineWood
- Engraving Method
- Line
- Material
- Wood
- Power
- 70%
- Depth
- 80%
- Pass
- 1
- Acceleration Level
- 1
- Module Type
- 20 W 450 nm
Step2:
Based on the photos and the floor plan, paint the roof sections and decorative pieces with white paint. Once dry, they can be assembled, and the pet house will be ready.
Christmas
Dog
Comments