Tic Tac Toe
Basic Information
| MachineLP5 |
| MaterialPlastic/Wood |
| Size90 x 120 mm |
| Material Information2mm black acrylic, 1.5mm plywood |
| Software UsedLaserPecker Design Space PC |
| Production Time30 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Connect the machine and open the file. Begin by placing 2mm black acrylic on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving and cutting at the same time.
The ghost chess pieces have been completed, and the bat chess pieces can be directly cut out without engraving.
Settings 1
| Engraving MethodFill |
| MaterialPlastic |
| Resolution2 K |
| Power20% |
| Depth30% |
| Pass1 |
| Module Type20W 1064nm |
| Laser Frequency26 |
Settings 2
| Engraving MethodLine |
| MaterialPlastic |
| Power100% |
| Depth95% |
| Pass5 |
| Module Type20W 450nm |
Step 2
Begin by placing 1.5mm plywood on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving and cutting.
Stick the two board pieces together, and you can start the game.
Settings 1
| Engraving MethodFill |
| MaterialWood |
| Resolution2 K |
| Power100% |
| Depth30% |
| Pass1 |
| Module Type20W 450nm |
| Laser Frequency26 |
Settings 2
| Engraving MethodCut |
| MaterialWood |
| Power70% |
| Depth80% |
| Pass7 |
| Module Type20W 450nm |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
