digermano
Wooden Earrings
How-to
- Machine
- LP2
- Material
- Wood
- Size
- 27 x 34 mm
- Software Used
- LaserPecker Design Space IOS
- Production Time
- 2 min
- Engraving Difficulty
Design Files
2024/07/23 22:3268
Introduction
1,5mm thick
How-to Tutorial
Step1:
You can use the image I put in the description, use Line or Cut mode depending on what application you use.
You will need to repeat the whole process unless you use LP Design Space.
Use the following settings: Power 100, Depth 30, Passes 3.
You can also directly use my G-Code with the same settings. No need to repeat the process.
When done, color as you wish. I got the earrings buckles from Amazon.
Have fun.
Settings 1
LineWood
- Engraving Method
- Line
- Material
- Wood
- Power
- 100%
- Depth
- 30%
- Pass
- 3
- Module Type
- 5 W 450 nm
- Other Parameters
- I used 1.5mm thick plywood. 2 passes are normally enough, but I rather use 3 to be sure everything is properly cut.
My Handmade Daily
Birthday Gift
DIY Assembly
Sharing Good Finds
Cutting
earring
Comments