heatherbroehm
Wood Engraved Earrings for Mother
Inspiration
- Machine
- LP2
- Material
- Wood
- Size
- 20 x 25 mm
- Material Information
- I bought wood tags on Amazon years ago, so I thought I'd try them out. I looked them up and they are unspecified wood at 3mm. I believe it's balsa wood.
- Software Used
- LaserPecker Design Space IOS
- Engraving Difficulty
2024/05/07 04:430
Introduction
I wanted to make a perfect Mother's Day gift. The Mother design is from Laser Pecker design space under Holidays. I created a 2mm ellipse for the circle. The tear drop outline and flowers are from Canva. The jewelry pieces are from Michaels craft store. I set the whole project up on Design Space, making sure to engrave the Mother and Flower designs first. Next I cut the tear drop and ellipse designs to complete the earrings.
Inspiration Tutorial
Settings 1
- Engraving Method
- Fill
- Material
- Wood
- Resolution
- 1 K
- Power
- 100%
- Depth
- 3%
- Pass
- 7
- Module Type
- 5 W 450 nm
- Other Parameters
- I used these settings for the Mother and Flower designs.
Settings 2
- Engraving Method
- Line
- Material
- Wood
- Power
- 100%
- Depth
- 20%
- Pass
- 5
- Module Type
- 5 W 450 nm
- Other Parameters
- I used these settings for the tear drop and ellipse designs to cut the wood.
Birthday Gift
Sharing Good Finds
Cutting
Comments