Lgawthorpe
Blank Bone ID Tag
How-to
- Machine
- LP2
- Material
- Plastic
- Size
- 98 x 98 mm
- Material Information
- Please use cast acrylic sheets not extruded.
- Software Used
- LaserPecker Design Space IOS
- Production Time
- 5 min
- Engraving Difficulty
Design Files
2024/03/28 22:0631
Introduction
For cutting and engraving on LP2, LP3, LP4 and LX1
How-to Tutorial
Step1: Place 2mm acrylic sheet under your laser on cutting bed
Download the file for the blank tag, upload to LP Design space, use only cast resin sheets of any colour of your choice, I made the design in inches do setting 1 for cut first. (Don’t have cut use line setting)
Engrave your text or design into the bone blank, single or double sided.
Purchase some keyring loops of eBay or Amazon or local craft store. Here’s what I use
Use the tags for your pets, luggage or cage if you’ve multiple pets and get mixed up.
Drill one 5mm hole in top of your blank ID tags for your keychain to go through.
Settings 1
CutPlastic
- Engraving Method
- Cut
- Material
- Plastic
- Power
- 100%
- Depth
- 100%
- Pass
- 4
- Module Type
- 5 W 450 nm
- Other Parameters
- Use cut setting if you don’t have line setting on your laser
Settings 2
FillPlastic
- Engraving Method
- Fill
- Material
- Plastic
- Resolution
- 2 K
- Power
- 60%
- Depth
- 20%
- Pass
- 1
- Module Type
- 5 W 450 nm
- Other Parameters
- Enter your details example > I’m lost, Call: 01234 56789
Cutting
Handmade
Acrylic
Tags
Blank
Plastic
Comments