LaserPecker
Wooden Rabbit Phone Holder
How-to
- Machine
- LX1
- Material
- Wood
- Size
- 183 x 215 mm
- Material Information
- 3mm Basswood Plank
- Software Used
- LaserPecker Design Space PC
- Production Time
- 10 min
- Engraving Difficulty
Design Files
2024/03/15 10:0649
Introduction
With Easter just around the corner, let's seize the opportunity to craft an adorable and festive wooden rabbit phone stand together!
How-to Tutorial
Step1:
Open the file, and connect the LX1. Begin by placing a 3mm basswood plank on the cutting pad. Adjust the focus, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
This file is only applicable to 3mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
By splicing together two wooden boards, the phone holder is ready. You can also paint it with your favorite colors to add more festive atmosphere.
Settings 1
LineWood
- Engraving Method
- Line
- Material
- Wood
- Power
- 70%
- Depth
- 80%
- Pass
- 1
- Acceleration Level
- 1
- Module Type
- 20 W 450 nm
- Other Parameters
- 3mm
Easter
Comments