Carrying and storage case.
How-to
Used design space to ingrave.
Basic Information
| MachineLP1-Pro |
| MaterialWood |
| Size200 x 200 mm |
| Material InformationNew case I made to store and carry my LaserPecker LP1pro. |
| Software UsedLaserPecker Design Space IOS |
| Production Time150 min |
| Engraving Difficulty |
How-to Tutorial
Step 1 Top engrave.
Used preloaded pictures.
Settings 1
| Engraving MethodPicture |
| MaterialWood |
| Resolution1 K |
| Power100% |
| Depth50% |
| Pass1 |
| Module Type0.5W 405nm |
| Other ParametersBox I made from cherry wood. |
Step 2
Bold
Settings 1
| Engraving MethodPicture |
| MaterialWood |
| Resolution2 K |
| Power100% |
| Depth50% |
| Pass1 |
| Module Type0.5W 405nm |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
8
My Handmade Daily
DIY Assembly

