Open in LDS
Leather Bookmark
How-to
LaserPecker
2024/02/23 19:58 9
To infuse our reading moments with fun and delight, let's experiment with carving creatively intriguing patterns on leather bookmarks!
Basic Information
| MachineLP4 |
| MaterialLeather |
| Size50 x 50 mm |
| Software UsedLaserPecker Design Space PC |
| Production Time3 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the file and connect the machine. Begin by placing a blank book marker on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving.
Additionally, if you use different materials, you will need to adjust the parameters yourself.
Once the engraving is completed, it's ready to be used by placing it between the pages of a book.
Settings 1
| Engraving MethodFill |
| MaterialLeather |
| Resolution2 K |
| Power25% |
| Depth2% |
| Pass1 |
| Module Type10 W 450 nm |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
12
Good Life
