Jantsa
Engraving on a glass goblet with marking paper.
How-to
- Machine
- LP4
- Material
- Glass
- Size
- 50 x 30 mm
- Software Used
- LaserPecker Design Space PC
- Production Time
- 3 min
- Engraving Difficulty
2024/02/05 04:550
Introduction
Goblets are generally very delicate, and therefore the font should be rather thinner. During the tests of one of the cups, I was able to break it under the laser because the engraving font was thick, even though the settings were all the same as what I'm sharing. A thinner font is better for engraving on a goblet.
How-to Tutorial
Step1:
Cut out from marking paper the amount you need for your engraving, put it into the water for 20 seconds and then take out and place it on the glass on the area where you would like to engrave. You can find specific paper in Aliexpress or Amazon. Type in: Colored Laser Engraving Marking Paper. You need to use rotary extension to fix the glass. Then place in settings and engrave. After engraving place the glass to the water for some minutes and the paper will come off easily and you are ready, wipe the glass.
Settings 1
FillGlass
- Engraving Method
- Fill
- Material
- Glass
- Resolution
- 2 K
- Power
- 67%
- Depth
- 9%
- Pass
- 1
- Module Type
- 10 W 450 nm
Christmas
Thanksgiving
Black Friday
Happy New Year
Good Life
My Handmade Daily
Birthday Gift
Birthday Party Decoration
Afternoon Tea
Comments