Open in LDS
Heart-shaped Box
How-to
LaserPecker
2024/01/13 10:58 39
Make a heart-shaped box to store some memorable items.
Basic Information
| MachineLX1 |
| MaterialWood |
| Size339 x 379 mm |
| Material Information3mm Basswood Plank |
| Software UsedLaserPecker Design Space PC |
| Production Time30 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the file and connect the machine. Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
This file is only applicable to 3mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
Settings 1
| Engraving MethodLine |
| MaterialWood |
| Power70% |
| Depth80% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Step 2
As shown in the picture, the wooden pieces are spliced together, and glue is filled in the gaps to make it more secure. Heart-shaped Box is ready.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
17
Valentine's Day
Heart
