Open in LDS
Gratitude Greeting Card
How-to
LaserPecker
2024/01/05 18:38 3
If you receive a blessing or a gift from a friend, you can write a thank-you card to him. Let's use the engraving machine to make a greeting card.
Basic Information
| MachineLX1 |
| MaterialPaper |
| Size220 x 229 mm |
| Software UsedLaserPecker Design Space PC |
| Production Time15 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Begin by placing green and red paper on the cutting plate. Open the file, connect the machine, adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Note that if you're using different materials, remember to adjust the parameters accordingly.
Settings 1
| Engraving MethodLine |
| MaterialPaper |
| Power100% |
| Depth10% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Step 2
Paste the two parts together and the greeting card is ready. Go ahead and write your thanks and wishes to your friend.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Gratitude Greeting Card.lp2
Open in LDSDownload
5
Thanksgiving
Greeting Card
