Open in LDS
Notebook
How-to
LaserPecker
2024/01/04 19:37 13
Engrave a pattern on your leather notebook that you like.
Basic Information
| MachineLP4 |
| MaterialLeather |
| Size106 x 99 mm |
| Software UsedLaserPecker Design Space PC |
| Production Time15 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Begin by placing a notebook on the base. Open the file, connect the machine, adjust the focus, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving.
If you're using different materials, remember to adjust the parameters accordingly.
Settings 1
| Engraving MethodLine |
| MaterialLeather |
| Power25% |
| Depth2% |
| Pass1 |
| Module Type10 W 450 nm |
Step 2
Repeat the above operation to engrave another book.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
11
Notebook
