Open in LDS
Christmas Gift Bags
How-to
LaserPecker
2024/01/04 18:44 25
Let's make some decorative engravings for the gift bags.
Basic Information
| MachineLP4 |
| MaterialPaper |
| Size130 x 157 mm |
| Software UsedLaserPecker Design Space PC |
| Production Time20 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the file and connect the LP4 and the LP4 Slide Extension, place a blank brown gift paper bag on the base. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving.
If you use different materials or want different effects, you will need to adjust the parameters accordingly.
Settings 1
| Engraving MethodFill |
| MaterialPaper |
| Resolution2 K |
| Power50% |
| Depth2% |
| Pass1 |
| Module Type10 W 450 nm |
Step 2
Put another colored paper bag and replace the new parameter engraving. You will get different effects.
Settings 1
| Engraving MethodFill |
| MaterialPaper |
| Resolution2 K |
| Power1% |
| Depth1% |
| Pass1 |
| Module Type10 W 450 nm |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
14
Christmas
Gift
