Open in LDS
Wedding Signage
How-to
LaserPecker
2023/12/29 17:39 5
Make a guide sign for the wedding.
Basic Information
| MachineLX1 |
| MaterialWood |
| Size372 x 374 mm |
| Material Information3mm Basswood Plank |
| Software UsedLaserPecker Design Space PC |
| Production Time30 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Connect the machine and open the file. Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving and cutting at the same time.
Note that if you're using different materials, remember to adjust the parameters accordingly.
Settings 1
| Engraving MethodFill |
| MaterialWood |
| Resolution2 K |
| Power25% |
| Depth3% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Settings 2
| Engraving MethodLine |
| MaterialWood |
| Power70% |
| Depth80% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Step 2
Next, paint the cut fonts and paste them in the appropriate position.The wedding signage is ready.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
646d952166ee4166938e47eba2eaa7b7__%3AWedding%20Signage.lp2
Open in LDSDownload
5
Wedding
