LaserPecker
Geometric dice
How-to
- Machine
- LP4
- Material
- Wood
- Size
- 35 x 54 mm
- Software Used
- LaserPecker Design Space PC
- Production Time
- 8 min
- Engraving Difficulty
Design Files
2023/12/28 18:453
Introduction
Let's make creative geometric dice together.
How-to Tutorial
Step1:
Open the file, place a blank wooden dice on the base, hide the graphics of other layers, and display the target graphic. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving.
Note that If you use different materials or want different effects, you will need to adjust the parameters accordingly.
Settings 1
FillWood
- Engraving Method
- Fill
- Material
- Wood
- Resolution
- 2 K
- Power
- 25%
- Depth
- 3%
- Pass
- 1
- Module Type
- 10 W 450 nm
Step2:
Repeat the above steps to engrave different patterns on all six sides. The creative dice is ready. You can also engrave your favorite patterns or words. Go ahead and try it.
Game
Geometry
Comments