Open in LDS
Christmas Phone Protector Case
How-to
LaserPecker
2023/12/21 21:12 30
Make a Christmas-themed protective case for your phone.
Basic Information
| MachineLP4 |
| MaterialPlastic/Silicone |
| Size150 x 160 mm |
| Software UsedLaserPecker Design Space PC |
| Production Time10 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Begin by placing a protective case on the base. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving.
Settings 1
| Engraving MethodPicture |
| MaterialPlastic |
| Resolution2 K |
| Power100% |
| Depth20% |
| Pass1 |
| Module Type2 W 1064 nm |
Step 2
Different colors of phone cases and trying different parameters will also give different results.
Settings 1
| Engraving MethodPicture |
| MaterialPlastic |
| Resolution2 K |
| Power100% |
| Depth25% |
| Pass1 |
| Module Type2 W 1064 nm |
Step 3
The Christmas-themed phone cases is ready, you can give it to your friends.
Settings 1
| Engraving MethodPicture |
| MaterialPlastic |
| Resolution2 K |
| Power100% |
| Depth8% |
| Pass1 |
| Module Type10 W 450 nm |
Step 4 Note
If you use different materials or want different effects, you will need to adjust the parameters accordingly.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
8575d310cc22422180060351548016b2__%3AChristmas%20Phone%20Case-01-yellow.lp2
Open in LDSDownload
8176f0da0f05418db6ff8d4bbcc5f52a__%3AChristmas%20Phone%20Case-02-green.lp2
Open in LDSDownload
9e07a4f494c94f7ab5fecea2053b707e__%3AChristmas%20Phone%20Case-03-purple.lp2
Open in LDSDownload
a4d792ee8507444c8be7684662495910__%3AChristmas%20Phone%20Case-04-purple.lp2
Open in LDSDownload
17
Christmas
Phone
