LaserPecker
Thanksgiving Storage Box
How-to
- Machine
- LX1
- Material
- Wood
- Size
- 398 x 386 mm
- Material Information
- 3mm Basswood plank
- Software Used
- LaserPecker Design Space PC
- Production Time
- 30 min
- Engraving Difficulty
Design Files
2023/12/15 15:2612
Introduction
Let's use a carving machine to make a wooden rabbit phone holder.
How-to Tutorial
Step1:
Begin by placing a 3mm basswood plank on the cutting pad. Open the file, connect the LX1， adjust the focus, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Settings 1
FillBasswood plank
- Engraving Method
- Fill
- Material
- Basswood plank
- Resolution
- 2 K
- Power
- 40%
- Depth
- 20%
- Pass
- 1
- Acceleration Level
- 1
- Module Type
- 20 W 450 nm
Settings 2
LineBasswood plank
- Engraving Method
- Line
- Material
- Basswood plank
- Power
- 70%
- Depth
- 80%
- Pass
- 1
- Acceleration Level
- 1
- Module Type
- 20 W 450 nm
Step2:
Follow the steps on the picture and splice the cut wood pieces together to make the Thanksgiving storage box.
Step3: Note
This file is only applicable to 3mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
Thanksgiving
Storage Box
Comments