LaserPecker
Christmas Tree Snow Ornament
How-to
- Machine
- LX1
- Material
- Wood
- Size
- 76 x 80 mm
- Material Information
- 3mm Basswood plank
- Software Used
- LaserPecker Design Space PC
- Production Time
- 10 min
- Engraving Difficulty
Design Files
2023/12/15 11:5812
Introduction
With Christmas just around the corner, it's time to prepare festive decorations using the LX1 engraving machine. Follow these steps to create your Christmas tree masterpiece.
How-to Tutorial
Step1:
Open the file. Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Settings 1
LineBasswood plank
- Engraving Method
- Line
- Material
- Basswood plank
- Power
- 70%
- Depth
- 80%
- Pass
- 1
- Acceleration Level
- 3
- Module Type
- 20 W 450 nm
Step2:
String it with thin string and hang it on the Christmas tree.
Step3:
If you're using planks or materials of different thicknesses, remember to adjust the parameters accordingly.
Christmas
Christmas Tree
Cutting
Ornament
Snow
Comments