LaserPecker

Wooden Rabbit Decoration

How-to
Machine
LX1
Material
Wood
Size
153 x 197 mm
Material Information
3mm Basswood plank
Software Used
LaserPecker Design Space PC
Production Time
25 min
Engraving Difficulty

Design Files

Wooden Rabbit Decoration.lp2
2023/12/22 16:5413

Introduction

Let's use a carving machine to make a wooden rabbit decoration.

How-to Tutorial

1

Step1:

Begin by placing a 3mm basswood plank on the cutting pad. Open the file, connect the LX1, adjust the focus, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.

Settings 1

Engraving Method
Line
Material
Wood
Power
70%
Depth
80%
Pass
1
Acceleration Level
1
Module Type
20 W 450 nm
2

Step2:

After gluing the wooden blocks together, the wooden rabbit decoration is ready!

3

Step3: Note

This file is only applicable to 3mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.

Birthday Gift
Sharing Good Finds

Comments