Open in LDS
Female Paper-Cutting
How-to
LaserPecker
2023/12/15 11:27 6
Let's see how to make a Paper-Cutting decoration.
Basic Information
| MachineLX1 |
| MaterialPaper |
| Size195 x 252 mm |
| Software UsedLaserPecker Design Space PC |
| Production Time15 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the file. Begin by placing a sheet of A4-sized kraft paper on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Settings 1
| Engraving MethodLine |
| MaterialRecycled paper |
| Power100% |
| Depth10% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Step 2
Glue the cut paper and the blank paper together, and fix them in the frame. The Female Paper-Cutting decoration is ready.
Step 3
If you're using different materials, remember to adjust the parameters accordingly.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
290751cdc96b4d57b1ff1e5d444c74ff__%3AFemale%20Paper-Cutting.lp2
Open in LDSDownload
6
Good Life
Birthday Gift
DIY Assembly
