Open in LDS
Tangram Toy
How-to
LaserPecker
2023/12/11 19:37 7
Let's make a tangram toy.
Basic Information
| MachineLX1 |
| MaterialWood |
| Size243 x 120 mm |
| Software UsedLaserPecker Design Space PC |
| Production Time20 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Begin by placing a 3mm basswood plank on the cutting plate. Open the LP2 file, adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving.
Settings 1
| Engraving MethodLine |
| MaterialBasswood plank |
| Power70% |
| Depth80% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Step 2
Glue two large square plates together, and paint each small wooden piece with a color. The tangram is ready. You can use colored small wooden pieces to piece together various interesting graphics.
Step 3 Note
If you're using planks or materials of different thicknesses, remember to adjust the parameters accordingly.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Tangram Toy.lp2
Open in LDSDownload
4
Toy
Tangram
