LaserPecker
Christmas Tree Layered Decoration
How-to
- Machine
- LX1
- Material
- Wood
- Size
- 93 x 114 mm
- Material Information
- 3mm Basswood plank
- Software Used
- LaserPecker Design Space PC
- Production Time
- 10 min
- Engraving Difficulty
Design Files
2023/12/11 18:2323
Introduction
With Christmas just around the corner, it's time to prepare festive decorations using the LX1 engraving machine. Follow these steps to create your Christmas tree masterpiece.
How-to Tutorial
Step1:
Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Settings 1
CutBasswood plank
- Engraving Method
- Cut
- Material
- Basswood plank
- Power
- 70%
- Depth
- 80%
- Pass
- 1
- Acceleration Level
- 1
- Module Type
- 10 W 450 nm
Step2:
After painting one of the layers with your favorite color, string it with thin string and hang it on the Christmas tree.
Step3: Note
If you're using planks or materials of different thicknesses, remember to adjust the parameters accordingly.
Christmas
Christmas Tree
Ornaments
Comments