LaserPecker
Christmas Tree Decoration
How-to
- Machine
- LX1
- Material
- Wood
- Size
- 137 x 224 mm
- Material Information
- 6mm Basswood plank
- Software Used
- LaserPecker Design Space PC
- Production Time
- 15 min
- Engraving Difficulty
Design Files
2023/12/12 17:4112
Introduction
With Christmas coming, it's time to make a Christmas tree decoration using the LX1 engraving machine.
How-to Tutorial
Step1:
Open the LP2 file. Begin by placing a 6mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Settings 1
LineBasswood plank
- Engraving Method
- Line
- Material
- Basswood plank
- Power
- 100%
- Depth
- 80%
- Pass
- 1
- Acceleration Level
- 1
- Module Type
- 20 W 450 nm
Step2:
Follow the steps on the pictures, and connect the cut wood pieces together, add decorative ball and bow.You will end up with a complete Christmas tree decoration.
Step3: Note
This file is only applicable to 6mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
Christmas
Christmas Tree
Decoration
Comments