Open in LDS
Christmas Elk Ornament
How-to
LaserPecker
2023/12/21 14:14 39
As the holiday season approaches, craft your own Christmas elk ornament with these easy steps.
Basic Information
| MachineLX1 |
| MaterialWood |
| Size162 x 173 mm |
| Material Information3mm Basswood plank |
| Software UsedLaserPecker Design Space PC |
| Production Time20 min |
| Engraving Difficulty |
How-to Tutorial
Step 1 Cut Basswood Plank
Begin by placing a 3mm basswood plank on the cutting plate. Open the LP2 file, adjust the focus, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Settings 1
| Engraving MethodFill |
| MaterialWood |
| Resolution2 K |
| Power30% |
| Depth10% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Settings 2
| Engraving MethodLine |
| MaterialWood |
| Power70% |
| Depth80% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Step 2 Assemble Elk
Assemble the base and legs according to the provided pictures. Apply glue to the gaps, construct the body and antlers, and then attach them to the legs. Your elk ornament is now assembled.
Step 3 Note
This file is only applicable to 3mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
christmas%20elk%20ornament.lp2
Open in LDSDownload
13
Decoration
Christmas
Elk
