Open in LDS
Christmas Tree Paper Sculpture
How-to
LaserPecker
2023/12/21 14:14 11
Create your own stunning Christmas tree paper sculpture with these simple steps.
Basic Information
| MachineLX1 |
| MaterialPaper |
| Size210 x 297 mm |
| Material InformationGreen Cardstock Paper, Yellow Cardstock Paper |
| Software UsedLaserPecker Design Space PC |
| Production Time30 min |
| Engraving Difficulty |
How-to Tutorial
Step 1 Cut Green Tree Pieces
Begin by placing green paper on the cutting plate. Open the file for the tree, adjust the focus, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Settings 1
| Engraving MethodLine |
| MaterialPaper |
| Power100% |
| Depth10% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Step 2 Cut Yellow Star Pieces
Now, place yellow cardboard on the cutting plate and open the file for the star. Begin the cutting process.
Settings 1
| Engraving MethodLine |
| MaterialPaper |
| Power100% |
| Depth10% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Step 3 Assemble the Paper Pieces
Assemble the paper pieces according to the steps shown in the accompanying picture. Following these steps will result in a complete Christmas tree paper sculpture.
Note that if you're using different materials, you may need to adjust the parameters accordingly.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
6
Christmas
Christmas Tree
Decoration
Paper Sculpture
