LaserPecker
Christmas Tree Layered Decoration
How-to
- Machine
- LX1
- Material
- Wood
- Size
- 275 x 109 mm
- Material Information
- 3mm Basswood plank
- Software Used
- LaserPecker Design Space PC
- Production Time
- 20 min
- Engraving Difficulty
Design Files
2023/12/11 18:0638
Introduction
With Christmas just around the corner, it's time to prepare festive decorations using the LX1 engraving machine. Follow these steps to create your Christmas tree masterpiece.
How-to Tutorial
Step1:
Begin by placing a 3mm basswood board on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Settings 1
LineWood
- Engraving Method
- Line
- Material
- Wood
- Power
- 70%
- Depth
- 80%
- Pass
- 1
- Acceleration Level
- 1
- Module Type
- 10 W 450 nm
Step2:
Paint one of the layers with a color of your choice. Then, glue the layers together one by one. Once assembled, use string to secure the layers, creating a beautiful ornament that can be hung on the Christmas tree.
Step3: Note
If you're using boards or materials of different thicknesses, remember to adjust the parameters accordingly.
Christmas
Christmas Tree
Decoration
Comments