Open in LDS
Wooden Aircraft Model
How-to
LaserPecker
2023/12/08 19:33 45
Let's make a wooden aircraft model together.
Basic Information
| MachineLX1 |
| MaterialWood |
| Size357 x 228 mm |
| Material Information3mm Basswood plank |
| Software UsedLaserPecker Design Space PC |
| Production Time30 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Settings 1
| Engraving MethodLine |
| MaterialBasswood plank |
| Power70% |
| Depth80% |
| Pass1 |
| Acceleration Level1 |
| Module Type10 W 450 nm |
Step 2
Assemble the wooden pieces and you will end up with a complete wooden aircraft model.
Step 3 Note
This file is only applicable to 3mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Wooden Aircraft Model.lp2
Open in LDSDownload
16
Wooden
Model
Aircraft
