CraftZone
LaserPecker

Easter Eggs

How-to
Machine
LP4
Material
Wood
Size
36 x 39 mm
Software Used
LaserPecker Design Space PC
Production Time
10 min
Engraving Difficulty
Firmware version
≥655

Design Files

file
One-Sided Pattern on Easter Eggs.lp2
2025/04/03 16:1214

Introduction

Add a touch of festivity to the wooden egg by engraving exquisite decorations.

How-to Tutorial

1

Step1:

To engrave a pattern on one side of the wooden egg, first fix the wooden egg on the base. Connect the machine and open the file. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving.

Settings 1

LineWood

Engraving Method
Line
Material
Wood
Power
28%
Depth
55%
Pass
1
Module Type
10 W 450 nm
2

Step2:

If you want to engrave a circular pattern on the wooden egg, you need to use the rotary extension. Open the file, connect the machine and the rotary extension, measure the diameter or circumference of the egg, and fill in the location shown in the image. Fix the egg on the rotation, then adjust the focus, verify the size, preview the position, and determine the engraving parameters. Next, you can start engraving.

Good Life
Easter

Comments