๐ฐ๐ธ Easter Bunny Candy / Treat Holder โ A Fun & Reusable Easter Gift! ๐ธ๐ฐ
- Machine
- LP5
- Material
- Plastic Dome/Cardstock/3mm Basewood
- Size
- 226 x 147 mm
- Material Information
- - LaserPecker Slide Extension - Safety Glasses - 3mm Basewood - Amazon - 3.54" Clear Plastic Dome - Amazon - Cardstock - Superglue - Candy - Paint (pink, white, black) - Paintbrush - Baby Wipes
- Production Time
- 60 min
- Engraving Difficulty
Design Files
Introduction
How-to Tutorial
Step1: Gather the Materials Needed
Materials Needed:
- LaserPecker Slide Extension
- Safety Glasses
- 3mm Basewood - https://www.amazon.com/dp/B0CZ5
- 3.54" Clear Plastic Dome - https://www.amazon.com/dp/B0CKYQ1JGF?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1
- Cardstock
- Superglue
- Candy
- Paint (pink, white, black)
- Paintbrush
- Baby Wipes
Step2: Upload File Named (MAIN BODY) to Design Space and Set Your Focal Point
Begin Engraving: The main body piece. (Wood)
Settings 1
PictureWood
- Engraving Method
- Picture
- Material
- Wood
- Resolution
- 2 K
- Power
- 80%
- Depth
- 35%
- Pass
- 5
- Module Type
- 20W 450nm
- Other Parameters
- Set Image Size to: 147.58mm x 226.34mm
Step3: Upload File Named (PIECES) to Design Space and Set Your Focal Point
Begin Engraving: All body pieces. (Wood)
Settings 1
PictureWood
- Engraving Method
- Picture
- Material
- Wood
- Resolution
- 2 K
- Power
- 80%
- Depth
- 35%
- Pass
- 5
- Module Type
- 20W 450nm
- Other Parameters
- Set Image Size to: 65.14mm x 209.82mm
Step4: Use Shape Tool to create a 92.12mm Circle
Cut from Cardstock
Set circle size to be exactly: 92.12mm
Settings 1
PicturePaper
- Engraving Method
- Picture
- Material
- Paper
- Resolution
- 1 K
- Power
- 47%
- Depth
- 60%
- Pass
- 6
- Module Type
- 20W 450nm
- Other Parameters
- Set the Circle Size to be: 92.12mm
Step5: Wipe Off Soot and Paint Pieces
Use baby wipes to remove any soot from your cut wood pieces. Don't worry too much about any leftover marks as you can paint over them. Use acrylic paint to add color to your bunny and allow them to dry.
Step6: Assemble Your Candy Holder
Use superglue or gorilla glue to adhere your pieces onto the main body. Insert the dome piece from the back side and glue in place.
Step7: Fill Belly with Desired Candy or Treat and Glue on Cardstock Backing
Fill the belly of your bunny with your desired treat and glue on the cardstock backing. Add to your childs Easter basket or give alone as a special Easter treat.
Comments