Christmas Tree with Ornaments
How-to
texan_90
2024/12/25 05:49 6
Made a Christmas Tree with engraved Ornaments
Basic Information
| MachineLP2 |
| MaterialWood |
| Size66 x 80 mm |
| Material InformationBuilt a Christmas tree from 5.5-inch pine slats. The total height of tree is 3 feet. Once constructed, I used LP2 to decorate the tree with various designs of engraved ornaments. There are a total of 45 ornaments in this tree. Engraving time for each ornament is between 1-2 min, total of 55 min |
| Software UsedLaserPecker Design Space PC |
| Production Time55 min |
| Engraving Difficulty |
How-to Tutorial
Step 1 Open your laser packer app. Click on the image icon and upload the image you want to engrave
In the spirit of the holiday season, we set out to create a wooden Christmas tree with a unique twist. To make it truly special, we decorated it with 45 engraved ornaments, crafted using our LP2. It was such a fun and rewarding project, and we believe it's one of a kind! While wooden Christmas trees are common, we haven't seen any decorated with engraved ornaments quite like ours.
Settings 1
| Engraving MethodFill |
| MaterialWood |
| Resolution1 K |
| Power100% |
| Depth12% |
| Pass1 |
| Module Type5 W 450 nm |
Settings 2
| Engraving MethodPicture |
| MaterialWood |
| Resolution1 K |
| Power100% |
| Depth30% |
| Pass1 |
| Module Type5 W 450 nm |
Settings 3
| Engraving MethodLine |
| MaterialWood |
| Power100% |
| Depth3% |
| Pass1 |
| Module Type5 W 450 nm |
Step 2 After engraving the ornaments on the wooden Christmas Tree...
After engraving the ornaments on the wooden Christmas Tree, we added lights and ribbon to jazz it up!
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
bd02d3bc06ff4752970bb340a3d4c0e2__%3Aengraving%20settings.jpg
3
My Handmade Daily
#laserpackerfun
#Christmas
#Handcrafted
#engraved
#sherwoodrooster
