Open in LDS
Christmas Dog House
How-to
LaserPecker
2024/12/07 12:11 17
Have you picked the perfect gift for your furry friend? With the LaserPecker LX1-Max, you can DIY a cozy little house for them!
Basic Information
| MachineLX1 |
| MaterialWood |
| Size1634 x 947 mm |
| Material Information3mm Basswood Plank |
| Software UsedLaserPecker Design Space PC |
| Production Time120 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Connect the machine and open the first file. Begin by placing 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Cut the parts out of the file one by one.
Settings 1
| Engraving MethodLine |
| MaterialWood |
| Power70% |
| Depth80% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Step 2
Based on the photos and the floor plan, paint the roof sections and decorative pieces with white paint. Once dry, they can be assembled, and the pet house will be ready.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
170f08a561224c74a73bf02c2501fe83__%3AChristmas%20Dog%20House-all.lp2
Open in LDSDownload
921a648df6c24a5b85af3c2725c647da__%3AChristmas%20Dog%20House-all%20-%201.lp2
Open in LDSDownload
6e4b6ed6901c47e69d39679e5965ff1b__%3AChristmas%20Dog%20House-all%20-%202.lp2
Open in LDSDownload
4e6faba673124b36bf5221725a347833__%3AChristmas%20Dog%20House-all%20-%203.lp2
Open in LDSDownload
4de33e4ae97243658f9d380a019bc4bb__%3AChristmas%20Dog%20House-all%20-%204.lp2
Open in LDSDownload
db7233b154694da4908877ddea6e345a__%3AChristmas%20Dog%20House-all%20-%205.lp2
Open in LDSDownload
ef80dfdf42ed4e039d9653a509d51076__%3AChristmas%20Dog%20House-all%20-%206.lp2
Open in LDSDownload
2
Christmas
Dog
