Tic Tac Toe
How-to
- Machine
- LP5
- Material
- Plastic/Wood
- Size
- 90 x 120 mm
- Material Information
- 2mm black acrylic, 1.5mm plywood
- Software Used
- LaserPecker Design Space PC
- Production Time
- 30 min
- Engraving Difficulty
Design Files
2024/10/25 17:3526
Introduction
Looking for a fun way to keep the kids entertained this Halloween? Create your own Tic Tac Toe board using black acrylic and wood for a cool, hands-on holiday activity!
How-to Tutorial
Step1:
Connect the machine and open the file. Begin by placing 2mm black acrylic on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving and cutting at the same time.
The ghost chess pieces have been completed, and the bat chess pieces can be directly cut out without engraving.
Settings 1
- Engraving Method
- Fill
- Material
- Plastic
- Resolution
- 2 K
- Power
- 20%
- Depth
- 30%
- Pass
- 1
- Module Type
- 20W 1064nm
- Laser Frequency
- 26
Settings 2
- Engraving Method
- Line
- Material
- Plastic
- Power
- 100%
- Depth
- 95%
- Pass
- 5
- Module Type
- 20W 450nm
Step2:
Begin by placing 1.5mm plywood on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving and cutting.
Stick the two board pieces together, and you can start the game.
Settings 1
- Engraving Method
- Fill
- Material
- Wood
- Resolution
- 2 K
- Power
- 100%
- Depth
- 30%
- Pass
- 1
- Module Type
- 20W 450nm
- Laser Frequency
- 26
Settings 2
- Engraving Method
- Cut
- Material
- Wood
- Power
- 70%
- Depth
- 80%
- Pass
- 7
- Module Type
- 20W 450nm
Halloween

Comments