krizas8913

Andrew Kriz

How-to
Machine
LP2
Material
Wood
Size
178 x 348 mm
Material Information
The wood is a basic cutting board off Amazon that a customer liked. The wood type is acacia. The customer is a sasquatch fanatic and wanted this design for display in their home.
Software Used
LaserPecker Design Space PC
Production Time
10 min
Engraving Difficulty

Design Files

sasquatch advice full.lp2
2024/05/31 21:3923

Introduction

Sasquatch cutting board laser engraving

How-to Tutorial

1

Step1: Sasquatch cutting board

The engraving area will not accommodate the full design. You will have to do each section separately and center accordingly to achieve the full design. I The top and bottom are 1 inch from the ends and centered. I chose the font based on what the customer liked to give it that sasquatch handwriting feeling.

Settings 1

Engraving Method
Fill
Material
Wood
Resolution
2 K
Power
100%
Depth
10%
Pass
1
Module Type
5 W 450 nm
Other Parameters
The wood thickness is approximately 0.75 inches. the laser was 11cm (110mm) from the piece of wood
My Handmade Daily
cutting board
sasquatch
big foot
engraving

Comments