Open in LDS
Obile Phone Charging Stand
How-to
LaserPecker
2024/05/06 16:39 38
A phone charging shelf is convenient when you need to charge your phone but there is no table or other surface near the wall socket.
Basic Information
| MachineLX1 |
| MaterialWood |
| Size167 x 124 mm |
| Material Information3mm Basswood Plank |
| Software UsedLaserPecker Design Space PC |
| Production Time15 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the file and connect the machine. Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving and cutting.
This file is only applicable to 3mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
Settings 1
| Engraving MethodFill |
| MaterialWood |
| Resolution2 K |
| Power60% |
| Depth3% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Settings 2
| Engraving MethodLine |
| MaterialWood |
| Power70% |
| Depth80% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Step 2
Assemble the cut parts and use glue in the gaps to make it more sturdy.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
56609111f4ad4349afa28b29de26cfde__%3AMobile%20Phone%20Charging%20Stand.lp2
Open in LDSDownload
8
Good Life
Sharing Good Finds
