Lgawthorpe
Blank round ID Tag
How-to
- Machine
- LP2
- Material
- Plastic
- Size
- 98 x 98 mm
- Material Information
- Cast acrylic sheets
- Software Used
- LaserPecker Design Space IOS
- Production Time
- 5 min
- Engraving Difficulty
Design Files
2024/03/28 21:0123
Introduction
For LP2,LP3, LP4 and LX1
How-to Tutorial
Step1: Place your Acrylic resin sheet under on the cutting bed and cut using line or cut mode.
Download design Blank ID Tag 2 is identical to the one pictured the other design doesn’t have loop for the hole to be drilled but still can be used, upload to LP Design space, use only cast resin sheets of any colour of your choice, avoid light colours like lime green and aqua blue, I made the design in inches do setting 1 for cut first. (Don’t have cut use line setting)
Engrave your text or design into the blank, single or double sided.
Use keychains from your local craft store or online, I get ten on Amazon UK for £5.99
Settings 1
CutPlastic
- Engraving Method
- Cut
- Material
- Plastic
- Power
- 100%
- Depth
- 100%
- Pass
- 4
- Module Type
- 5 W 450 nm
- Other Parameters
- Use maximum of 2mm nothing thicker or it won’t cut > Red, Dark Blue, Dark Green, Black are cut easily with the laser
Settings 2
FillPlastic
- Engraving Method
- Fill
- Material
- Plastic
- Resolution
- 2 K
- Power
- 30%
- Depth
- 20%
- Pass
- 1
- Module Type
- 5 W 450 nm
- Other Parameters
- Engrave your text, Example> I’m lost, Call:01234 56789
Cutting
Acrylic
Tags
Blank
Plastic
ID
Pet
Engraving
Comments