Open in LDS
Wooden Tube Rack
How-to
LaserPecker
2024/03/02 19:01 7
Create a wooden test tube vase holder to adorn your life in a unique way.
Basic Information
| MachineLX1 |
| MaterialWood |
| Size185 x 94 mm |
| Material Information3mm Basswood Plank |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the file and connect the machine. Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
This file is only applicable to 3mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
After being assembled, it can hold test tubes with a diameter of 15mm.
Settings 1
| Engraving MethodLine |
| MaterialWood |
| Power70% |
| Depth80% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
9d86603ebfc2456c8aa1b48c69bd63c5__%3AWooden%20Tube%20Rack.lp2
Open in LDSDownload
5
Good Life
Flower
