Open in LDS
Wooden Rose
How-to
LaserPecker
2024/02/27 16:46 27
With Women's Day just around the corner, let's create some fun wooden rose flowers to give as gifts to them!
Basic Information
| MachineLX1 |
| MaterialWood |
| Size328 x 190 mm |
| Software UsedLaserPecker Design Space PC |
| Production Time30 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the file and connect the machine. Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
If you're using planks or materials of different thicknesses, remember to adjust the parameters accordingly.
After applying color to the bottom layer, adhere it to the upper wooden piece, and the wooden rose flower will be complete.
Settings 1
| Engraving MethodLine |
| MaterialWood |
| Power70% |
| Depth80% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Wooden Rose.lp2
Open in LDSDownload
9
Good Life
Flower
