Open in LDS
Couple Geometric Bracelets
How-to
LaserPecker
2024/02/02 16:31 1
Valentine's Day is around the corner, make a special couple bracelet for your lover.
Basic Information
| MachineLX1 |
| MaterialWood |
| Size39 x 16 mm |
| Material Information3mm Basswood Plank |
| Production Time10 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the file and connect the machine. Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
Additionally, if you're using planks or materials of different thicknesses, remember to adjust the parameters accordingly.
By combining braided rope and wooden slices, the couple bracelets is ready.
Settings 1
| Engraving MethodLine |
| MaterialWood |
| Power70% |
| Depth80% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Couple Geometric Bracelets.lp2
Open in LDSDownload
2
Valentine's Day
