Open in LDS
Rock Coffee Coaster
How-to
LaserPecker
2024/01/19 16:56 15
Let's make a rock coffee coaster.
Basic Information
| MachineLP4 |
| MaterialStone |
| Size82 x 77 mm |
| Software UsedLaserPecker Design Space PC |
| Production Time10 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Begin by placing a rock coaster on the base. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving.
Settings 1
| Engraving MethodFill |
| MaterialStone |
| Resolution2 K |
| Power100% |
| Depth8% |
| Pass1 |
| Module Type2 W 1064 nm |
Step 2
After that, you will get a rock coffee coaster. If you're using different materials, remember to adjust the parameters accordingly.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
2e32c70736284e41a27cb7cdbbb553a9__%3ARock%20Coffee%20Coaster.lp2
Open in LDSDownload
11
Good Life
Coffee
