LaserPecker
Travel Camping Cup
How-to
- Machine
- LP4
- Material
- Metal/Wood
- Size
- 25 x 30 mm
- Software Used
- LaserPecker Design Space PC
- Production Time
- 10 min
- Engraving Difficulty
Design Files
2024/01/29 16:0213
Introduction
Use the machine to create a travel camping cup.
How-to Tutorial
Step1:
Open the file, connect the machine and the rotary extension, measure the diameter or circumference of the cup, and fill in the location shown in the image. Fix the mug on the rotation, then adjust the focus, verify the size, preview the position, and determine the engraving parameters. Next, you can start engraving.
Settings 1
FillMetal
- Engraving Method
- Fill
- Material
- Metal
- Resolution
- 2 K
- Power
- 100%
- Depth
- 8%
- Pass
- 1
- Module Type
- 2 W 1064 nm
Step2:
Repeat the above operation to modify the engraving parameters, and the wooden material below is also engraved with graphics.
If you're using different materials, remember to adjust the parameters accordingly.
Settings 1
FillWood
- Engraving Method
- Fill
- Material
- Wood
- Resolution
- 2 K
- Power
- 25%
- Depth
- 2%
- Pass
- 1
- Module Type
- 10 W 450 nm
Good Life
Comments