Open in LDS
Travel Camping Cup
How-to
LaserPecker
2024/01/19 15:35 13
Use the machine to create a travel camping cup.
Basic Information
| MachineLP4 |
| MaterialMetal/Wood |
| Size25 x 30 mm |
| Software UsedLaserPecker Design Space PC |
| Production Time10 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the file, connect the machine and the rotary extension, measure the diameter or circumference of the cup, and fill in the location shown in the image. Fix the mug on the rotation, then adjust the focus, verify the size, preview the position, and determine the engraving parameters. Next, you can start engraving.
Settings 1
| Engraving MethodFill |
| MaterialMetal |
| Resolution2 K |
| Power100% |
| Depth8% |
| Pass1 |
| Module Type2 W 1064 nm |
Step 2
Repeat the above operation to modify the engraving parameters, and the wooden material below is also engraved with graphics.
If you're using different materials, remember to adjust the parameters accordingly.
Settings 1
| Engraving MethodFill |
| MaterialWood |
| Resolution2 K |
| Power25% |
| Depth2% |
| Pass1 |
| Module Type10 W 450 nm |
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
13
Good Life
