Open in LDS
Rock Steak-shaped Coaster
How-to
LaserPecker
2024/01/19 15:19 12
engrave your favorite graphics for your rock chopping board!
Basic Information
| MachineLP4 |
| MaterialStone |
| Size148 x 85 mm |
| Software UsedLaserPecker Design Space PC |
| Production Time20 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the file and connect the LP4 and the LP4 Slide Extension. Place the board on the Slide Extension. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters.. Next, you can start engraving.
If you're using different materials, remember to adjust the parameters accordingly.
Settings 1
| Engraving MethodFill |
| MaterialStone |
| Resolution2 K |
| Power100% |
| Depth10% |
| Pass1 |
| Module Type2 W 1064 nm |
Step 2
A creative rock steak-shaped coaster is completed.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
9
Good Life
food
