LaserPecker

Heart-shaped Box

How-to
Machine
LX1
Material
Wood
Size
339 x 379 mm
Material Information
3mm Basswood Plank
Software Used
LaserPecker Design Space PC
Production Time
30 min
Engraving Difficulty

Design Files

Heart-shaped Gift Box-01.lp2
2024/01/15 17:0843

Introduction

Make a heart-shaped box to store some memorable items.

How-to Tutorial

1

Step1:

Open the file and connect the machine. Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.

This file is only applicable to 3mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.

Settings 1

Engraving Method
Line
Material
Wood
Power
70%
Depth
80%
Pass
1
Acceleration Level
1
Module Type
20 W 450 nm
2

Step2:

As shown in the picture, the wooden pieces are spliced together, and glue is filled in the gaps to make it more secure. Heart-shaped Box is ready.

Valentine's Day
Heart

Comments