Open in LDS
Wooden Tulips
How-to
LaserPecker
2024/01/12 20:30 5
Let's make some wooden tulips.
Basic Information
| MachineLX1 |
| MaterialWood |
| Size224 x 249 mm |
| Software UsedLaserPecker Design Space PC |
| Production Time30 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the file and connect the machine. Begin by placing a 4mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
This file is only applicable to 4mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
Settings 1
| Engraving MethodLine |
| MaterialWood |
| Power80% |
| Depth80% |
| Pass1 |
| Acceleration Level1 |
| Module Type20 W 450 nm |
Step 2
Paint the wood pieces with your favorite colors, and after the paint dries, assemble the wood pieces according to the corresponding shapes.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
8c6061efd3e048ada953c7fc6b535648__%3AWooden%20Tulips.lp2
Open in LDSDownload
4
Flower
