LaserPecker
Angel Candlestick
How-to
- Machine
- LX1
- Material
- Wood
- Size
- 224 x 249 mm
- Software Used
- LaserPecker Design Space PC
- Production Time
- 30 min
- Engraving Difficulty
Design Files
2024/01/12 20:2512
Introduction
Make a wooden angel candlestick.
How-to Tutorial
Step1:
Open the file and connect the machine. Begin by placing a 3mm basswood plank on the cutting plate. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start cutting.
This file is only applicable to 3mm basswood planks. Other thicknesses of wood may not be able to be assembled. Additionally, if you use different materials, you will need to adjust the parameters yourself.
Settings 1
LineWood
- Engraving Method
- Line
- Material
- Wood
- Power
- 70%
- Depth
- 80%
- Pass
- 1
- Acceleration Level
- 1
- Module Type
- 20 W 450 nm
Step2:
By splicing the wood pieces together, the candlestick is ready. It is suitable for placing small candles.
Angel
Comments