Open in LDS
Rainbow Snowflake Watch Bands
How-to
LaserPecker
2023/12/29 16:02 25
Let's see how to make rainbow snowflake watch bands.
Basic Information
| MachineLP4 |
| MaterialPlastic |
| Size118 x 118 mm |
| Production Time30 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the file, connect the the LP4. Remove the watch bands, place them on the base in order. adjust the focus, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving.
Settings 1
| Engraving MethodFill |
| MaterialPlastic |
| Resolution2 K |
| Power100% |
| Depth25% |
| Pass2 |
| Module Type2 W 1064 nm |
Step 2
The pattern is engraved. After cleaning the dust on it, it can be worn on the hand.
Go ahead and give it a try.
Step 3 Note
Since the engraved pattern is larger than the material, you can place a piece of unused material under the material to protect your machine.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Rainbow Snowflake Watch Strap.lp2
Open in LDSDownload
14
Christmas
Snow
Watch Band
