Open in LDS
Geometric dice
How-to
LaserPecker
2023/12/28 18:45 3
Let's make creative geometric dice together.
Basic Information
| MachineLP4 |
| MaterialWood |
| Size35 x 54 mm |
| Production Time8 min |
| Engraving Difficulty |
How-to Tutorial
Step 1
Open the file, place a blank wooden dice on the base, hide the graphics of other layers, and display the target graphic. Adjust the focal length, verify the size, preview the position, and determine the engraving parameters. Once everything is set, proceed to start engraving.
Note that If you use different materials or want different effects, you will need to adjust the parameters accordingly.
Settings 1
| Engraving MethodFill |
| MaterialWood |
| Resolution2 K |
| Power25% |
| Depth3% |
| Pass1 |
| Module Type10 W 450 nm |
Step 2
Repeat the above steps to engrave different patterns on all six sides. The creative dice is ready. You can also engrave your favorite patterns or words. Go ahead and try it.
Design Files
LaserPecker Design Space V2.5.1 or above is recommended.
Geometric dice.lp2
Open in LDSDownload
5
Game
Geometry
